User’s Manual
5-5
The Keyboard
Display selection:
Press
Fn
+
F5
to change the active display device.
When you press these hot keys, a dialog box appears. Only selectable
devices will be displayed. Hold down
Fn
and press
F5
again to change the
device. When you release
Fn
and
F5
, the selected device will change. If
you hold down these hot keys for three seconds the selection will return to
the internal
LCD
.
Internal LCD screen Brightness:
Pressing
Fn
+
F6
decreases the LCD
screen brightness in decrements. When you press these hot keys, the
current setting will be displayed for two seconds by a pop-up icon. You can
also change this setting through the
Screen brightness
item of the
Basic
Setup
tab in TOSHIBA Power Saver.
Internal LCD screen Brightness:
Pressing
Fn
+
F7
increases the LCD
screen brightness in increments. When you press these hot keys, the
current setting will be displayed for two seconds by a pop-up icon. You can
also change this setting through the
Screen brightness
item of the
Basic
Setup
tab in TOSHIBA Power Saver.
Wireless setting:
If your computer has Wireless LAN functions, you can
press
Fn
+
F8
to turn wireless communication on and off. When you press
these hot keys, a dialog box will appear. Continue holding down
Fn
and
press
F8
to change the setting. If wireless communication is turned off,
Disabled Wireless Communication Switch
will be displayed.
Q
The brightness level is always set at the maximum value for about
18 seconds, when the internal LCD screen turns on. After 18 seconds,
the brightness level will appear at the Power Save Mode setting or you
can change it manually.
Q
LCD screen clarity increases with the brightness level.