USB Flash Memory will be formatted and all the data in the USB Flash
Memory will be lost when proceeding.
2.
Turn on your computer and allow it to load the Windows operating
system from the internal storage as normal.
3.
Insert the first blank disc into the external optical disc drive tray, or
insert the USB Flash Memory into one available USB port (except the
USB Type-C™ port on the keyboard dock which is used for charging
only).
4.
Click
Start -> Windows System -> Control Panel -> System and
Security -> Security and Maintenance -> Recovery -> Create a
recovery drive
.
5.
Follow the on-screen instructions to finish creating the Recovery
Media.
dynabook Recovery Wizard option in dynabook Maintenance Utility will
not exist if you restore the computer from the recovery media you created
by recovery drive creating option in Windows system.
Restoring the pre-installed software from your created
Recovery Media
If the pre-installed files are damaged, you are able to use the Recovery
Media you have created to restore the computer to the state it was in when
you originally received it. To perform this restoration, do the following:
Make sure that the AC adaptor is connected during the restoring
process.
Make sure to dock the tablet computer to Keyboard Dock before
restoring the operating system (only for X30T-E).
Do not close the display panel during the restoring process (only for
X30T-E).
When you reinstall the Windows operating system, the internal storage
will be reformatted and all data will be lost.
If your model has fingerprint function, before you reinstall the Windows
operating system, delete the registered fingerprints. Otherwise, same
fingerprints cannot be registered after the reinstallation.
1.
Load the Recovery Media into the external Optical Disc Drive or insert
the recovery USB Flash Memory into one available USB port (except
the USB Type-C™ port on the keyboard dock which is used for
charging only).
2.
Click
Start -> (Power)
and then select
Restart
.
User's Manual
2-21