3.
Hold down the
F12
key and then release this key just after the
computer is power on.
Without the keyboard dock, you can hold down the
Volume up
button
until the Boot menu is loaded after the computer is power on.
4.
Use the up and down cursor key or tap the display screen to select the
appropriate option from the menu according to your actual recovery
media.
5.
A menu is displayed from which you should follow the on-screen
instructions.
If you have previously chosen to remove the recovery partition without
creating Recovery Media, the Recovery Media cannot be created.
However, if you have already created a Recovery Media, you can use it to
restore the recovery partition.
If you have not created Recovery Media, contact Technical support for
assistance.
Restoring the pre-installed software from the
Recovery Partition
A portion of the total internal storage space is configured as a hidden
recovery partition. This partition stores files which can be used to restore
pre-installed software in the event of a problem.
If you set up your internal storage again later, do not change, delete, or add
partitions in a manner other than specified in the manual, otherwise you
might find that space for the required software is not available.
In addition, if you use a third-party partitioning program to reconfigure the
partitions on your internal storage, you might find that it becomes
impossible to set up your computer.
Make sure that the AC adaptor is connected during the restoring
process.
Make sure to dock the tablet computer to Keyboard Dock before
restoring the operating system (only for X30T-E).
Do not close the display panel during the restoring process (only for
X30T-E).
When you reinstall the Windows operating system, the internal storage
will be reformatted and all data will be lost.
If your model has fingerprint function, before you reinstall the Windows
operating system, delete the registered fingerprints. Otherwise, same
fingerprints cannot be registered after the reinstallation.
1.
Click
Start -> (Power)
and then select
Restart
.
User's Manual
2-22