To insert a Smart Card, do the following:
1.
Insert the Smart Card into the Smart Card slot with the metal
connectors facing down.
2.
Press the Smart Card gently to ensure a firm connection is made.
Figure 4-9 Installing the Smart Card
2
1
1. Smart Card
2. Smart Card slot
When inserting a Smart Card into the Smart Card slot, make sure to
confirm that the card is oriented correctly before inserting.
Insert the Smart Card until it reaches the end of the Smart Card slot.
The Smart Card is partially extended beyond the chassis edge. Do not
attempt to insert it further.
Always remove the Smart Card from the Smart Card slot before
moving the computer.
Before removing the Smart Card, confirm that the Smart Card is not
working with any program or system.
Remove the Smart Card after use.
Be careful not to bend the Smart Card while removing it from the
computer.
Failure to follow these instructions might result in damage to the computer
and/or damage to the Smart Card.
3.
After inserting the Smart Card, you should refer to its documentation
and also check the configuration in Windows to ensure that it is
correct.
Wireless WAN device
Some models are equipped with the Wireless WAN device. This device
enables a high-speed connection to the Internet, corporate intranet, and
your email while you are away from the office.
Installing a SIM card
To install a SIM card, do the following:
1.
Click
Start -> (Power)
, and then select
Shut down
to turn the
computer off.
User's Manual
4-19