System Information—Allows you to view basic information of your
computer.
Options—Allows you to set options for sending data logs.
dynabook Setup Utility
dynabook Setup Utility is a BIOS setup utility that provides you a menu-
based user interface so that you can easily view and change BIOS
settings.
To enter the dynabook Setup Utility, do the following:
1.
Save your work.
2.
Click
Start -> (Power)
and then select
Restart
.
3.
Hold down the
F2
key and then release this key just after the
computer is power on.
Without the keyboard dock, you can hold down the
Volume down
button until dynabook Setup Utility is loaded after the computer is
power on.
The dynabook Setup Utility can also be launched by button combination.
1.
Save your work.
2.
Click
Start -> (Power)
and then select
Shut down
.
3.
While holding down the
Volume down
button, press the
Power
button
to turn on the power. Release the
Volume down
button after
dynabook Setup Utility is loaded.
Make sure that fast startup is disabled in the Power Options by the
following steps:
1. Click Start -> Windows System -> Control Panel -> System and
Security -> Power Options.
2. Click Choose what the power buttons do or Choose what closing
the lid does.
3. Click Change settings that are currently unavailable.
4. Deselect the Turn on fast startup check box from Shutdown settings.
5. Click the Save changes button.
To save the changes and exit the utility, press the
F10
key and proceed by
selecting
Yes
or select
Exit -> Exit Saving Changes -> Yes
. The
computer restarts immediately.
dynabook Maintenance Utility
dynabook Maintenance Utility is provided to erase the internal storage
drive. This utility allows you to delete all data and partitions, and also
overwrite all sectors on the internal storage drive.
User's Manual
5-5
