3.
Insert the memory media into the memory media slot on the side of
the computer.
Figure 4-19 Inserting memory media
1
2
1. Memory media slot
2. Memory media
Make sure the memory media is oriented properly before you insert it.
If you insert the media in wrong direction, you may not be able to
remove it.
When inserting the memory media, do not touch the metal contacts.
You could expose the storage area to static electricity, which can
destroy data.
Do not turn the computer off or switch to Sleep Mode or Hibernation
Mode while files are being copied - doing so may cause data to be
lost.
4.
Push the memory media gently until you hear a click.
Removing memory media
The following instructions apply to all types of supported media devices. To
remove memory media, follow the steps as detailed below:
1.
Click the
Desktop
tile and open the
Safely Remove Hardware and
Eject Media
icon on the Windows Taskbar.
2.
Point to
memory media
and click the left Touch Pad control button.
3.
Push the memory media until you hear a click to partially release it.
4.
Grasp the memory media and remove it.
5.
Insert the dummy card back into the slot.
If you remove the memory media or turn off the power while the
computer is accessing the memory media, you may lose data or
damage the media.
Do not remove the memory media while the computer is in Sleep or
Hibernation Mode. The computer could become unstable or data in
the memory media could be lost.
User's Manual
4-25
