41
Getting Started
Charging the main battery
3
Connect the power cord/cable to a live electrical outlet.
The AC power light on the indicator panel glows white.
Never attempt to connect or disconnect a power plug
with wet hands. Failure to follow this instruction could
result in an electric shock, possibly resulting in serious
injury.
The computer’s main battery light gives you an
indication of the main battery’s current charge:
❖
Glows amber while the main battery is being charged
(AC adaptor connected)
❖
Glows white when the main battery is fully charged
❖
Is unlit when the battery is not charging, or the AC
adaptor is not plugged into the computer or AC
outlet
❖
Flashes amber when the main battery charge is low
and it is time to recharge the main battery or plug in
the AC adaptor
If the AC power light flashes amber during charging,
either the main battery is malfunctioning, or it is not
receiving correct input from the AC power supply.
Charging the main battery
The computer’s battery is not accessible by the user.
Before using the battery to power the computer, you must
charge the battery.
To charge the battery, leave the computer plugged into an
AC power source with the computer turned off until the
battery light glows white. After that, the battery will be
completely charged and ready to power the computer.
Battery life and charge time may vary depending on the
applications power management settings, and features
used.
NOTE
NOTE
NOTE