background image

User’s Manual

2-11

The Grand Tour

System indicators

The LED system indicators for specific computer operations glow when 

those operations are in progress.

System indicators

DC IN

The 

DC IN

 indicator normally glows Red when 

power is being correctly supplied from the AC 

power adaptor. However, If the output voltage 

from the adaptor is abnormal, or if the computer's 

power supply malfunctions, this indicator will 

flash amber.

Power

The 

Power

 indicator normally glows Red when 

the computer is turned on. However, if you turn 

the computer off into Sleep Mode, this indicator 

will flash amber - approximately one second on, 

two seconds off - both while the system is 

shutting down and while it remains turned off.

Battery

The 

Battery

 indicator shows the condition of the 

battery's charge - Red indicates the battery is 

fully charged, amber indicates the battery is 

charging, and flashing amber indicates a low 

battery condition. Please refer to Chapter 6, 

Power

 for more information on this feature.

HDD/ODD/eSATA

This HDD/ODD/eSATA indicator glows red 

whenever the computer is accessing the built-in 

Hard Disk Drive, Optical Disc Drive and eSATA.

Bridge media slot

The 

Bridge media

 

slot

 indicator glows Red 

when the computer is accessing the Bridge 

media slot.

Summary of Contents for PQX31U-00U00C





























































































































































































































Reviews: