Real Time Clock
Problem
Procedure
The BIOS setting
and system date/
time are lost.
The charge in the Real Time Clock (RTC) battery
has run out - you will need to set the date and time
in the BIOS setup application by using the
following steps:
1.
In the
Settings
charm, click
Power
and then
select
Restart
.
2.
Hold down the
F2
key and then release this
key one second after the computer is power
on - the BIOS setup utility will load.
3.
Set the date in the
System Date
field.
4.
Set the time in the
System Time
field.
5.
Press
F10
- a confirmation message will be
displayed.
6.
Press the
ENTER
key - the BIOS setup
application will end and the computer will
restart.
Keyboard
Keyboard problems can be caused by the setup and configuration of the
computer - please refer to the
The Keyboard
section for further information.
Problem
Procedure
Some letter keys
produce numbers
Check that the numeric keypad overlay is not
activated - press the
FN + F11
function key and try
typing again.
Output to screen is
garbled
Please refer to your software's documentation to
ensure that it is not remapping the keyboard in any
way (remapping involves changing or reassigning
the function of each key).
If you are still unable to use the keyboard, you
should contact TOSHIBA Support.
Internal display panel
Apparent computer's display panel problems may be related to the
computer's setup and configuration - please refer to the
TOSHIBA System
Settings
section, for further information.
User's Manual
6-6
