48
Q9 ASD Quick Start Guide
Search (For Default Setting Changes)
A listing of all parameters that have been changed from the factory default settings may be viewed
sequentially by accessing the
Search
screen (Program
Search
).
The
Search
feature allows the user to view (and/or change) the parameters that are different from the
factory default settings. From the
Search
screen, press the
Rotary Encoder
to start the
Search
function. Once started, the system automatically scrolls through all of the system parameters and halts
once reaching a changed parameter.
After stopping at a changed parameter, the
Rotary Encoder
may be clicked either clockwise or
counter-clockwise once to continue scrolling either forward or reverse, respectively. With each
Up
or
Down
click from a stop, the system scrolls and stops at the next parameter that has been changed.
Press the
Rotary Encoder
once while the system is halted at a changed parameter to enter the
Edit
mode (parameter title flashes). Turn the
Rotary Encoder
to change the setting.
While still in the
Edit
mode, press the
Mode
key
to exit the
Search
function without saving the change,
press the
ESC
key to return to the
Search
mode, or press the
Rotary Encoder
to accept and save the
new setting.
Note:
Some parameters use the unsaved changed value until the ASD is reset or powered off
(e.g., Frequency Command, Accel/Decel, etc.).
Pressing the
Mode
key when done searching or when halted at a changed parameter returns the system
to the
primary menu loop.
Phone: 800.894.0412 - Fax: 888.723.4773 - Web: www.clrwtr.com - Email: info@clrwtr.com
