105
Learning the Basics
Powering down the computer
5.375 x 8.375 ver 2.3
Connecting your computer to a network
You can connect your computer to a network remotely, using
the built-in modem and a dial-up connection. For specific
information about connecting to the local area network
(LAN) or wide area network (WAN), consult your network
administrator.
To use a dial-up connection, have your network administrator
configure your computer for the network and supply you with
the telephone number for the dial-up connection. To set up
the network connection, use the Dial-Up Networking Wizard:
1
Click
Start
and point to
All
Programs
.
2
Point to
Accessories
, then to
Communications
.
3
Click
Network Setup Wizard
or
Network
Connections
.
4
Enter the phone number of your network connection and
let the program dial the number.
The computer connects with the network.
Powering down the computer
Pushing the power button before shutting down the Windows
®
operating system could cause you to lose your work. Make
sure the system indicator panel’s disk light and the drive-in-
use light are off. If you turn off the power while a disk is being
accessed, you may lose data or damage the disk and/or drive.
When you power down the computer, you have three options
to choose from: Turn Off Computer, Standby, and
Hibernation.
You can set the computer to turn on automatically at a time
you designate. This option is helpful for transferring files by
modem at night. You can use the Auto Power On option to set
