Meets or Exceeds
Your Specifications
QX7 Standard Specifications
Voltage Class
460 V
Maximum HP
60
75
100
125
150
200
250
300
350
400
500
600
700
800
Drive Rating
77
96
124
156
190
240
302
370
450
492
600
740
900
960
AA Dimensions
100” x 30” x 24”
100” x 42” x 24”
105” x 76” x 24”
AE Dimensions
100” X 54” X 24”
100” X 66” X 24”
Consult Factory
AS Dimensions
100” X 54” X 24”
100” X 60” X 24”
100” X 84” X 24”
Consult Factory
Power Requirements
Output Frequency
0 to 299 Hz
Main Circuit
Three-Phase, 460 V Input Auto-Transformer, 18-Pulse, IGBT Output
Power Terminlas
Input (L1,L2,L3); Output (T1,T2,T3); DCL (PA,PB);Dc Bus (PA,PC)
Control Power
DC Bus Control Power
Voltage Tolerence
±10%
Frequency Tolerence
±2%
Control Specifications
Control Method
Sine Wave PWM System
V/Hz
Control
Variable Torque, Constant Torque
Overload
Rating
120% for 60 Seconds, 100% Continuous
Frequency Setting
EOI Interface, 0 to10 VDC, -10 to +10 VDC, 4 to 20 mA, Binary and Motorized Potentiometer Input
Frequency Precision
Analog Input is 2% of Maximum Output; Digital Input is 0.01 Maximum Output
Frequency
Resolution
0.01 Hz Operation Panel, 0.1 Hz Anolog Input; 0 to 12-Bit A to D Converter
Accel./Decel. Time
0.1 to 6000 Seconds
Set Point Control
PID Loop Control
Analog Inputs
Four Programmable
Analog Outputs
Two Programmable to 66 Functions
Inputs Terminals
Eight Programmable to 33 Functions
Output Contacts
Three Output Terminals Programmable to 66 Functions; One Form-C, Two 250 VAC Form-A
Communications Port
RS232/485 and TTL Ports Standard
Protocol
Optional Profibus, Devicenet, Modbus RTU, Metysys, TCP/IP Ethernet
Soft Stall
Auto Load-Reduction Control Durring Overload Conditions
Retry
Up to Ten Retries with Up to Ten Seconds Between Each Retry
Restart
Able to Restart to Catch a Spinning Motor
Interface
EOI Display
4 Line X 20 Character LCD, Backlit Screen, Flash-Upgradeable Software
Keypad
Local/Remote, Manual/Auto, Speed Control, Setup/Program/Monitor, Run, Stop/Reset
Monitoring
Monitors Over 30 Parameters
Dispay Units
Display in Voltage, Amps, or Percent with Scaling Factor Multiplier
EOI Ports
RS232/485 and TTL Ports Standard
Remote Mounting
Up to 1000 Feet
Construction
Enclosure
NEMA 1 Gasketed and Filtered
Panel Construction
Free Standing, Front-Access Maintenance, Top/Bottom Cable Access
Ambient Conditions
Temperature
10 to 40°C or 14 to 104°F
Humidity
Maximum 95% (Non-Condensing) Without Derating
Altitude
Up to 1000 Meters or 3300 Feet Above Sea Level Without Derating
