User Manual
Page 11
The Fresh Air Vent allows the air conditioner to:
1. Recirculate inside air – Vent Closed (See Fig. A)
2. Draw fresh air into the room - Vent Open (See Fig. B)
3. Exchange air from the room and draw fresh air into the room - Vent and Exhaust Open (See Fig. C).
FRESH AIR VENT CONTROL (RAC-WK10/12 Models)
Fig. A (VENT CLOSED)
Fig. B (VENT OPEN)
Fig. C (VENT & EXHAUST OPEN)
O
per
ating
Instruc
tions
THERMOSTAT
The thermostat is used to set the desired room temperature when
the unit is being operated in the
COOL MODE
.
To set the desired room temperature, rotate the thermostat
switch to the desired setting. After the set temperature is
achieved the thermostat will automatically start and stop the
compressor in order to maintain the desired set temperature.
Rotate the thermostat selector clockwise for higher cool settings.
Higher cool settings will provide lower room temperature. Rotate
the thermostat selector counter clockwise for lower cool settings.
Lower cool settings will provide higher room temperature.
COOL MODE
The desired cool setting is selected by rotating the knob
clockwise to the desired position.
HIGH COOL
has maximum cooling eff ect and airfl ow.
LOW COOL
has minimum cooling eff ect and airfl ow.
FAN MODE
Rotate the knob counter clockwise to select your choice of fan
speeds for air circulation.
NOTE: When selecting a low fan or high fan, the compressor will not run.
Air Conditioner Features (RAC-WK05 only)
TEMP
MIN
COOL
MAX
COOL
MODE
The controls featured in this manual are representative of many
available models. Your model may off er slightly diff erent features.
NOTICE
Summary of Contents for RAC-WK0512CMRU
Page 32: ...Page 32 User Manual ...
