– 102 –
No.
Part name
Electronic
expansion valve
coil
Procedure
1. Detachment
1) Perform step 1 in
, all the steps in
and 1 in
.
2) Remove the coil by rotating it at 90
°
toward either direction.
2. Attachment
1) Insert a valve coil in a volve body to the
bottom, and fix it by rotating at 90° toword
either direction. And confirm to fix it surely.
Remarks
Hooking claw
Minus screwdriver
Fan guard
1. Detachment
1) Perform work of item 1 of
.
2) Remove the front cabinet, and put it down
so that fan guard side directs downward.
Perform work on a corrugated cardboard,
cloth, etc. to prevent flaw to the product.
3) Remove the hooking claws by pushing minus
screwdriver according to the arrow mark in
the right figure, and remove the fan guard.
2. Attachment
1) Insert claws of the fan guard in the holes
of the front cabinet. Push the hooking
claws (9 positions) by hands and fix the
claws.
Check that all the hooking claws are fixed
to the specified positions.
Lead
connecting part
Notch
Coil inserting
position
Fixing hole
for coil
Coil fixing
position
Rotate
90°
FILE NO. SVM-08011
