– 91 –
No.
Part name
1) Follow to the procedure in the item .
2) Remove the two screws used to secure
the bearing base.
3) Remove the bearing base.
<Caution at assembling>
• If the bearing is out from the housing,
push it into the specified position and then
incorporate it in the main body.
Two screws
Bearing
Bearing base
„
FILE NO. SVM-10015
Procedures
Remarks
Bearing base
Fan motor
1) Follow to the procedure till item .
2) Loosen the set screw of the cross flow fan.
3) Remove two fixing screws of the motor
cover and them remove the motor cover.
4) Remove two more fixing screws of the
motor band and remove the motor band.
Set screw
Two screw
Motor cover
Two screws on
motor band
o
…