FILE NO. SVM-09030
8-2. Installation Diagram of Indoor and Outdoor Units
−
28
−
1
Insulate the refrigerant pipes
separately with insulation, not
together.
Insert the cushion between the indoor
unit and wall, and tilt the indoor unit
for better operation.
For the rear left and left piping
Wall
Make sure to run the drain hose
sloped downward.
Do not allow the drain hose to get
slack.
Cut the piping
hole sloped
slightly.
The auxiliary piping can be connected
to the left, rear left, rear right, right,
bottom right or bottom left.
Right
Rear
right
Bottom
right
Rear
left
Bottom left
Left
6 mm thick heat resisting
polyethylene foam
V inyl tape
Apply after carrying
out a drainage test.
Saddle
Extension
drain hose
(
Not available,
provided by installer)
Shield pipe
Air filter
Hook
Installation
plate
Hook
65 mm or more
170 mm or more
270 mm or more
600 mm or more
100 mm or m
ore
100 mm
or more
600 mm o
r more
600 mm or more
3
Batteries
Pan head
wood screw
8
Super Sterilizer filter
5
2
Wireless remote control
4
Remote control holder
6
Super Oxi Deo filter
Before installing the wireless remote controller
• Loading Batteries
1. Remove the battery cover.
2. Insert 2 new batteries (AAA type)
following the (+) and (
−
) positions.
3 Batteries
2 Wireless remote controller
A
C
L
(Atta
ch to
the fr
ont p
anel.)
