4. DRY OPERATION (COOLING ONLY)
For dehumidification, a moderate cooling performance is controlled automatically.
1. Press
: Select Dry .
2. Press
: Set the desired temperature.
5. AIR PURIFYING OPERATION
During air conditioner operation
Press
to start and air ionizer operation.
The plasma air purifier and air ionizer can be activated or deactivated during air
conditioner is stopped and the air ionizer starts in conjunction with plasma air
purifier operation.
Note:
The FILTER indicator (orange) turns on after PURE operation is performed
for about 1000 hours.
6. Hi-POWER OPERATION
To automatically control room temperature and airflow for faster cooling or heating
Press
: Start and stop the operation.
operation (except in DRY and FAN ONLY mode)
7. ECO OPERATION
To automatically control room to save energy (except in DRY and FAN ONLY mode)
Press
: Start and stop the operation.
Note:
Cooling operation; the set temperature will increase automatically
0.5
degree/
hour for
4
hours (maximum 2 degrees increase). For heating operation the
set temperature will decrease.
8. TEMPORARY OPERATION
In case of the misplaced or discharged remote control
•
Pressing the RESET button, the unit can start or stop
without using the remote control.
•
Operation mode is set on AUTOMATIC
operation, preset temperature is 24°C
and fan operation is automatic speed.
9. TIMER OPERATION
FILE NO. SVM-12059
MODE
PURE
Hi POWER
Setting the ON Timer
Setting the OFF Timer
Press
: Set the desired ON timer.
Press
: Set the desired OFF timer.
Press
: Set the timer.
Press
: Set the timer.
Press
: Cancel the timer.
Press
Press
: Set the ON timer .
Press
.
Press
: Set the OFF timer .
Press
button during the ( or )
mark flashing.
1
1
2
3
2
3
3
4
Daily timer allows the user to set both the ON & OFF timers and will be activated on a daily basis.
Setting Daily Timer
· During the daily timer is activation, both arrows are indicated.
( or )
–
45
–
