1
1
. COMFORT SLEEP OPERATION
To save energy while sleeping, automatically control air flow and automatically turn OFF.
Note:
The cooling operation, the set temperature will increase automatically
1 degree/hour for 2 hours (maximum 2 degrees increase). For heating operation,
the set temperature will decrease.
QUIET
Press : Start and stop the operation.
Note:
Under certain conditions, QUIET operation may not provide adequate
cooling due to low sound features.
Press : Select 1, 3, 5 or 9 hrs for OFF timer operation.
9.
AUTO RESTART FUNCTION SETTING
This product is designed so that, after a power failure, it can restart automatically in the same
operating mode as before the power failure.
Information
The product is shipped with Auto Restart function in the ON position. Turn it OFF if this
function is not required.
How to turn OFF the Auto Restart Function
Press and hold the [OPERATION] button on the indoor unit for 3 seconds (3 beep sounds but
OPERATION
lamp does not blink).
How to turn ON the Auto Restart Function
Press and hold the [OPERATION] button on the indoor unit for 3 seconds (3 beep sounds
and OPERATION
lamp blink 5 time/sec for 5 seconds).
Note:
In case of ON timer or OFF timer are set, AUTO RESTART OPERATION does not activate.
10.
QUIET
OPERATION
1
2
.
8°C HEATING OPERATION
8°C
1.
Pre
ss
operation
button to change to 8°C set temperature heating operation.
Note:
8°C will operate in Heating mode only. If Air conditioner performs in
cooling operation
(including automatic cooling) or dry operation it will change to heating operating.
2.
Pre
ss
to adjust setting temperature from 5°C to 13°C.
1
3
.
SILENT OPERATION
SILENT OPERATION (
)
Keep outdoor unit operating silently to ensure either yourself or neighborhood will have a tight sleep in
nighttime. By this feature, the heating capacity will be optimized to deliver such silent experience.
The silent operation can be selected from one of two purposes (Silent 1 and Silent 2).
There are three setting parameters: Standard level > Silent 1 > Silent 2
Silent 1:
Though operating silently, the Heating (or Cooling) capacity is still prioritized to ensure having suf
fi
cient
comfort inside the room.
This setting is a perfect balance between the Heating (or Cooling) capacity and the Sound level of
outdoor unit.
Silent 2:
Compromising the Heating (or Cooling) capacity to the Sound level in any circumstance where the
outdoor unit’s sound level is highly prioritized.
This setting has a purpose to reduce the maximum sound level of outdoor unit by 4 dB(A).
Note:
●
While activating of Silent operation, inadequate heating (or cooling) capacity may occur.
Silent Operation (Outdoor Unit)
Press
SILENT#1
SILENT#2
None
- 61 -
