background image

11

EN

Combined timer (Setting both ON and OFF timers simultaneously)
OFF timer —> ON timer
(Operation —> Stop —> Operation)

This feature is useful when you want to stop the air conditioner after you go to sleep, and start it again in the
morning when you wake up or you return home.
Example:
To stop the air conditioner and start it again next morning.

Setting combined TIMER

(1) Press the OFF 

OFF

 button.

(2) Press the TIMER   button to adjust the OFF timer.

(3) Press the ON 

ON

 button.

(4) Press the TIMER   button to adjust the ON timer.

(5) Press the SET 

SET

 button.

ON timer —> OFF timer
(Stop —> Operation —> Stop)

You can use this setting to start the air conditioner when you wake up and stop it when you leave the house.
Example:
To start the air conditioner next morning and stop it.

Setting combined TIMER

(1) Press the ON 

ON

 button.

(2) Press the TIMER   button to adjust the ON timer.

(3) Press the OFF 

OFF

 button.

(4) Press the TIMER   button to adjust the OFF timer.

(5) Press the SET 

SET

 button.

Either ON or OFF timer function which is closer to the current
time, is activated first.

If the same time is set for both ON and OFF timers, no timer
operation is performed. Also, the air conditioner may stop
operating.

Every day combined timer (setting both ON and OFF timer simultaneously and activate
every day.)

This feature is useful when you want to use combined timer at the same time every day.

Setting combined TIMER

(1) Press the ON 

ON

 button.

(2) Press the TIMER   button to adjust the ON timer.

(3) Press the OFF 

OFF

 button.

(4) Press the TIMER   button to adjust the OFF timer.

(5) Press the SET 

SET

 button.

(6) After step (5), an arrow mark (  or  ) flashes for about

3 seconds and during this flashing, press the SET 

SET

 button.

During the every day timer is activating, both arrows (  ,  ) are indicated.

Cancel the timer operation

Press the CLR 

CLR

 button.

Clock display

During the TIMER operation (ON-OFF, OFF-ON, OFF timer) clock display is
disappeared so as to show the setting time. To see the present time, press
SET button briefly and the present time is displayed about 3 seconds.

Operation

Operation

Stop

Stop

Stop

Operation again

PRESET

FAN

MODE

Hi-POWER

ON

OFF

SET

CLR

ECO

AUTO

TIMER

CLOCK CHECK

RESET

FILTER

START/STOP

FIX 

MEMO

SWING

A

Downloaded from AC-Manual.com Manuals

Summary of Contents for RAS-18UAH-E


























Reviews: