AIR FLOW DIRECTION
3
AUTOMATIC OPERATION
6
To automatically select cooling, heating, or fan only operation
1. Press
: Select Auto A.
2. Press
: Set the desired temperature. Min. 17°C, Max. 30°C.
3. Press
: Select AUTO, LOW , LOW+
, MED
,
MED+
, HIGH
or QUIET
HEATING and 8°C OPERATION
DRY OPERATION
7
8
For dehumidi
fi
cation, a moderate cooling performance is controlled
automatically.
1. Press
: Select Heat
.
2. Press
: Set the desired temperature. Min = 5°C, Max = 30°C.
Temperature range 5-16°C is Heat mode with 8°C operation with less of
energy usage
3. Press
: Select AUTO, LOW , LOW+
, MED
,
MED+
, HIGH
or QUIET
Note :
During 8°C mode active (temperature range 5-16°C), some operation
such as QUIET, Hi POWER, TIMER OFF cannot use.
For dehumidi
fi
cation, a moderate cooling performance is controlled
automatically.
1. Press
: Select Dry
.
2. Press
: Set the desired temperature. Min. 17°C, Max. 30°C.
Note :
DRY mode fan speed is set to Auto only.
1
Press
: Move the
louver in the desired vertical
direction.
2
Press
: Move the
louver in the desired horizontal
direction.
3
SWING operation can be selected
from MENU button
Swing off
Vertical
(Up-Down)
Swing
Horizontal
(Left-Right)
Swing
Vertical and
Horizontal
Swing
HADA CARE
FLOW
●
Vertical (Up-Down) swing
●
Horizontal (Left-Right) swing
●
HADA Care
fl
ow
Note:
●
Do not move the louver manually by others.
●
The louver may automation positioning by some operation mode.
INDOOR UNIT DISPLAY
1
●
Display brightness can be adjusted, follow procedure on
"
1
8°C (White)
2
Wi-Fi access (White)
3
Hi POWER (White)
4
Timer (White)
5
Operation mode
- Cool (Blue)
- Heat (Orange)
1. Press
: Select Cool
, or Fan only
.
2. Press
: Set the desired temperature. Min. 17°C, Max. 30°C.
Fan Only: No temperature indication
3. Press
: Select AUTO, LOW , LOW+
, MED
,
MED+
, HIGH
or QUIET
COOLING / FAN ONLY OPERATION
5
REMOTE CONTROL
4
2
1
4
6
8
3
5
7
MODE
FAN
MENU
FIX
FIX
1
Infrared signal emitter
2
Start/Stop button
3
Mode select button
4
Temperature button
5
Fan speed button
6
Menu select button
7
Set louver Up-Down button
8
Set louver Left-Right button
9
Check button*
*Check button under battery cover
PREPARATION BEFORE USE
2
Preparing Filters
1. Open the air inlet grille and remove
the air
fi
lters.
2. Attach the
fi
lters. (see detail in the
Installation Manual).
Loading Batteries (when use wireless operation.)
1. Remove the slide cover.
2. Insert 2 new batteries (AAA type)
following the (+) and (–) positions.
Remote Control Reset
1. Remove the batteries.
2. Press
.
3. Insert the batteries.
OM_1126250234.indb 4
OM_1126250234.indb 4
13/6/2565 BE 09:35
13/6/2565 BE 09:35
