9.2 SILENT OPERATION (Outdoor Unit)
Keep outdoor unit operating silently to ensure either yourself or neighborhood
will have a tight sleep in nighttime. By this feature, the cooling capacity will be
optimized to deliver such silent experience. The silent operation can be selected
from one of two purposes (Silent 1 and Silent 2).
There are three setting parameters: Standard level > Silent 1 > Silent 2
Silent 1:
●
Though operating silently, the Cooling capacity is still prioritized to ensure
having suf
fi
cient comfort inside the room.
●
This setting is a perfect balance between the Cooling capacity and the Sound
level of outdoor unit.
Silent 2:
●
Compromising the Cooling capacity to the Sound level in any circumstance
where the outdoor unit’s sound level is highly prioritized.
●
This setting has a purpose to reduce the maximum sound level of outdoor unit.
Note:
●
While activating of Silent operation, inadequate cooling capacity may occur.
Silent Operation Setting
1. Press MENU button for enter menu selection
Blink
During triangle mark blink
can select menu by press TEMP. button.
Blink both triangle and
feature mark Feature
not yet set
2. Enter SILENT set by press MENU button.
triangle mark will stop blink and setting feature will be blink instead
3. Select SILENT operation by press TEMP. button
SILENT#1
SILENT#2
None
4. Con
fi
rm selected feature by press MENU button again
Blink only triangle
Feature already set
When feature had selected will return to menu selection display triangle
mark will blink
5. Leave from menu setting display by select EXIT.
9.3 Hi POWER OPERATION
To automatically control room temperature and air
fl
ow for faster cooling or
heating operation (except in DRY and FAN ONLY mode)
1. Press MENU button for enter menu setting and press TEMP. button to select
Hi POWER
Blink both triangle and
feature mark Feature
not yet set
2. Con
fi
rm selected feature by press MENU button again
Blink only triangle
Feature already set
3. Leave from menu setting display by select EXIT
9.4 ECO OPERATION
To automatically control room temperature to save energy
(except in DRY and FAN ONLY mode)
1. Press MENU button for enter menu setting and press TEMP. button to select
ECO
Blink both triangle and
feature mark Feature
not yet set
2. Con
fi
rm selected feature by press MENU button again.
Blink only triangle
Feature already set
3. Leave from menu setting display by select EXIT.
Note:
●
Cooling operation; the set temperature will increase automatically 1 degree/
hour for 2 hours (maximum 2 degrees increase). For heating operation the set
temperature will decrease.
OM_1126250234.indb 6
OM_1126250234.indb 6
13/6/2565 BE 09:35
13/6/2565 BE 09:35
