No.
Part name
Procedures
Remarks
2
Front cabinet
1. Detachment
1)
Perform step 1 in
1
.
2)
Remove the fixing screws (ST
2
TØ4 × 10L
2 pcs.) used to secure the front cabinet and
inverter cover, the screws (ST
2
TØ4 × 10L
4 pcs.) used to secure the front cabinet at
the bottom, and the fixing screws (ST
2
TØ4
× 10L 2 pcs.) used to secure the motor
base.
• The front cabinet is fitted into the side
cabinet (left) at the front left side so pull
up the top of the front cabinet to remove
it.
2. Attachment
1)
Insert the claw on the front left side into the
side cabinet (left).
2)
Hook the bottom part of the front right side
onto the concave section of the bottom
plate. Insert the claw of the side cabinet
(right) into the square hole in the front
cabinet.
3)
Return the screws that were removed
above
to their original positions and attach
them.
Front cabinet
Concave section
Claw
Square
hole
- 116 -
FILE NO. SVM-17057
