No.
Part name
Procedures
Remarks
9
Electronic expansion
valve coil
1. Detachment
1) Perform step 1 in
2
, all the steps in
3
and
1 in
5
.
2) Remove the coil by pulling it up from the
electronic control valve body.
2. Attachment
1) When assembling the coil into the valve
body, ensure that the coil anti-turn lock is
installed properly in the pipe.
<Handling precaution>
When handling the parts, do not pull the leads.
When removing the coil from the valve body, use
your hand to secure the body in order to prevent
the pipe from being bent out of shape.
!
Fan Guard
1. Detachment
1) Perform work of item 1 of
2
.
2) Remove the front cabinet, and put it down
so that fan guard side directs downward.
Perform work on a corrugated cardboard,
cloth, etc. to prevent f aw to the product.
3) Remove the hooking claws by pushing
minus screwdriver according to the arrow
mark in the right figure, and remove the fan
guard.
2. Attachment
1) Insert claws of the fan guard in the holes of
the front cabinet.
Push the hooking claws (9 positions) by
hands and fix the claws.
Minus screwdriver
Hooking claw
BODY-PMV
COIL-PMV
Rotate 180°C
Check that all the hooking claws
are fixed to the specified positions.
- 121 -
FILE NO. SVM-1
7057