No. Part name
Procedure
Remarks
②
Front
1.Detachment
cabinet
1) Perform work 1 of
①
.
2) Remove the front cabinet.
(ST1TØ4×10L 2pcs. : fix to motor base)
(ST1TØ4×10L 1pc. : fix to inverter cover)
(ST1TØ4×10L 4pcs. : fix to base plate)
• The front cabinet is fitted into the side cabinet
(left) at the front left side so pull up the top of
the front cabinet to remove it.
2.Attachment
1) Insert the claw on the front left side into the side
into the side cabinet (left).
2) Hook the bottom part of the front right side onto
the concave section of the base plate.
Insert the claw of the side cabinet (right) into the
square hole in the front cabinet.
3) Return the screws that were removed above to
their original positions, and attach them.
Motor base
Inverter cover
Front cabinet
Side cabinet (right)
- 80 -
