– 109 –
Square hole
Claw
Front cabinet
Concave section
No.
2
Part name
Front
cabinet
Procedure
1. Detachment
1) Perform step 1 in
1
.
2) Remove the fixing screws (ST1TØ4 × 8L
2 pcs.) used to secure the front cabinet
and inverter cover, the screws (ST1TØ4 ×
8L 3 pcs.) used to secure the front cabinet
at the bottom, and the fixing screws
(ST1TØ4 × 8L 2 pcs.) used to secure the
motor base.
• The front cabinet is fitted into the side
cabinet (left) at the front left side so pull up
the top of the front cabinet to remove it.
2. Attachment
1) Insert the claw on the front left side into the
side cabinet (left).
2) Hook the bottom part of the front right side
onto the concave section of the bottom plate.
Insert the claw of the side cabinet (right) into
the square hole in the front cabinet.
3) Return the screws that were removed above
to their original positions, and attach them.
Remarks
