– 78 –
Test
Room A
12:00
Mode
Fan Speed
Cool
Monitor Function
Code
00
Data
0024
Return
Refer to “
3
. Monitor f
u
nction” for det
a
il
s
.
1.Test mode
2.Register service info.
3.Alarm history
4.Monitor function
5.Setting louver position
Field setting menu(1/2)
Return
Set
Using the Service monitor with the [ MONITOR] button during the test mode
Push the [ MONITOR] button
2. Function selection setup
Perform the advanced settings for the air conditioner.
Carry out the setting operation while the indoor unit is stopped. (Turn off the air conditioning unit before starting
the setting operation.)
1
Push the [
] / [
] button to select
“6. FC setting” on the “Field setting menu”
screen, then push the “
Set” [ F2]
button.
→
The fan of the indoor unit operate.
→
Move the cursor to select “Function code” with the
“
<
<” [ F1] button, then set “Function
code” with the [
] / [
] button.
→
Move the cursor to select “data” with the
“
>
>” [ F2] button, then set “data” with the
[
] / [
] button.
2
Refer to the Installation Manual supplied with the
indoor unit or service manual for details about
the Function code and data.
3
Push the [
MENU] button to set the other
Function codes. After “Continue?” is displayed on
the screen, push the “
Yes
Yes” [ F1]
button.
4
Push the “
No
No” [ F2] button to finish
the setting operation. “ ” appears on the screen
for a while, then the screen returns to the “Field
setting menu” screen.
6.FC setting
Field setting menu (2/2)
Return
Set
FC setting
Code
(FC)
Data
Return
10
0000
Fix
<
>
Return
Continue?
No
Yes
FC setting
FC setting
Code
(FC)
Data
Return
10
0001
Fix
<
>
