3
EN
EN
GL
ISH
*1 Refrigerant piping covered with insulating material (polyethylene form, 6 mm thick).
*
In case the piping is installed above the ceiling, it shall be covered with thicker insulating material (polyethylene form, 10 mm
thick).
2 OPTIONAL PARTS, ACCESORIES AND TOOLS
Optional Installation Parts
Part name
Specifications
Q’ty
Refrigerant piping
*1
Indoor unit name
(Abbreviation)
Liquid side
(Outer diameter)
Gas side
(Outer diameter)
1 ea.
10, 13
6.35 mm
9.52 mm
16
6.35 mm
12.7 mm
Putty, PVC tapes
1 ea.
Attachment bolt arrangement of outdoor unit
• Secure the outdoor unit with the attachment bolts and nuts if the unit
is likely to be exposed to a strong wind.
• Use
φ
8 mm or
φ
10 mm anchor bolts and nuts.
• If it is necessary to drain the defrost water, attach drain nipple to the
base plate of the outdoor unit before installing it.
Accessory and Installation Parts
Part No.
Part name (Q’ty)
Part No.
Part name (Q’ty)
a
Outdoor unit installation manual x 1
c
Drain nipple x 1
(Heat pump models only)
b
Specifications x 1
d
Water-proof rubber cap x 2
(Heat pump models only)
Others
Name
Important information and warning
B/W strips (Energy efficiency labels)
Suction side
Diffuser
Drain hole
(
c
)
Elongated drain
hole
(
d
)
OutdoorInstallation.book Page 3 Wednesday, February 1, 2006 9:12 AM
