-51-
6.4.2
How to read malfunction check monitor display
By pressing [CHECK] key, times of No. 1 unit compressor-ON actuations as well as the check code information of 2 faults x 16
units are displayed on the time display area. (2 sec. per one phenomenon)
< Times of compressor-ON >
Display in 4 digits of hexadecimal notation
16
3
x 0 + 16
2
x 0 + 16 x 10 + 4 = 164
Display in 7 segments
< Check code information >
No display is made if there is no fault.
Ex. in case of the number of times of
compressor actuations of 164.
Unit number
Check code
The first detected
The last detected
Ex. In case of room temperature sensor of No. 1 unit in trouble.
For No. 15 unit, firstly heat exchanger temperature sensor and
secondly float switch circuit are faulty.
hexadecimal digit
decimal digit
Heronhill - for all your Toshiba requirements
Tel: 01823 665660
www.heronhill.co.uk
Fax: 01823 665807