background image

– 2 – 

 Thank you for purchasing this Toshiba air conditioner.
Please read carefully through these instructions that contain important information which complies with the 
Machinery Directive (Directive 2006/42/EC), and ensure that you understand them.
After completing the installation work, hand over this Installation Manual as well as the Owner’s Manual provided to 
the user, and ask the user to keep them in a safe place for future reference.

Generic Denomination: Air Conditioner

De

fi

nition of Quali

fi

ed Installer or Quali

fi

ed Service Person

The air conditioner must be installed, maintained, repaired and removed by a quali

fi

ed installer or quali

fi

ed service 

person. When any of these jobs is to be done, ask a quali

fi

ed installer or quali

fi

ed service person to do them for 

you. A quali

fi

ed installer or quali

fi

ed service person is an agent who has the quali

fi

cations and knowledge described 

in the table below.

De

fi

nition of Protective Gear

When the air conditioner is to be transported, installed, maintained, repaired or removed, wear protective gloves 
and ‘safety’ work clothing.
In addition to such normal protective gear, wear the protective gear described below when undertaking the special 
work detailed in the table below.
Failure to wear the proper protective gear is dangerous because you will be more susceptible to injury, burns, 
electric shocks and other injuries.

Work undertaken

Protective gear worn

All types of work

Protective gloves ‘Safety’ working clothing

Electrical-related work

Gloves to provide protection for electricians
Insulating shoes
Clothing to provide protection from electric shock

Work done at heights
(50 cm or more)

Helmets for use in industry

Transportation of 
heavy objects

Shoes with additional protective toe cap

Repair of outdoor unit

Gloves to provide protection for electricians

Agent

Quali

fi

cations and knowledge which the agent must have

Quali

fi

ed 

installer

• The quali

fi

ed installer is a person who installs, maintains, relocates and removes the air conditioners 

made by Toshiba Carrier Corporation. He or she has been trained to install, maintain, relocate and 
remove the air conditioners made by Toshiba Carrier Corporation or, alternatively, he or she has 
been instructed in such operations by an individual or individuals who have been trained and is thus 
thoroughly acquainted with the knowledge related to these operations.

• The quali

fi

ed installer who is allowed to do the electrical work involved in installation, relocation 

and removal has the quali

fi

cations pertaining to this electrical work as stipulated by the local laws 

and regulations, and he or she is a person who has been trained in matters relating to electrical 
work on the air conditioners made by Toshiba Carrier Corporation or, alternatively, he or she has 
been instructed in such matters by an individual or individuals who have been trained and is thus 
thoroughly acquainted with the knowledge related to this work.

• The quali

fi

ed installer who is allowed to do the refrigerant handling and piping work involved in 

installation, relocation and removal has the quali

fi

cations pertaining to this refrigerant handling 

and piping work as stipulated by the local laws and regulations, and he or she is a person who 
has been trained in matters relating to refrigerant handling and piping work on the air conditioners 
made by Toshiba Carrier Corporation or, alternatively, he or she has been instructed in such matters 
by an individual or individuals who have been trained and is thus thoroughly acquainted with the 
knowledge related to this work.

• The quali

fi

ed installer who is allowed to work at heights has been trained in matters relating to 

working at heights with the air conditioners made by Toshiba Carrier Corporation or, alternatively, 
he or she has been instructed in such matters by an individual or individuals who have been trained 
and is thus thoroughly acquainted with the knowledge related to this work.

Quali

fi

ed 

service person

• The quali

fi

ed service person is a person who installs, repairs, maintains, relocates and removes 

the air conditioners made by Toshiba Carrier Corporation. He or she has been trained to install, 
repair, maintain, relocate and remove the air conditioners made by Toshiba Carrier Corporation or, 
alternatively, he or she has been instructed in such operations by an individual or individuals who 
have been trained and is thus thoroughly acquainted with the knowledge related to these operations.

• The quali

fi

ed service person who is allowed to do the electrical work involved in installation, repair, 

relocation and removal has the quali

fi

cations pertaining to this electrical work as stipulated by the 

local laws and regulations, and he or she is a person who has been trained in matters relating to 
electrical work on the air conditioners made by Toshiba Carrier Corporation or, alternatively, he or 
she has been instructed in such matters by an individual or individuals who have been trained and is 
thus thoroughly acquainted with the knowledge related to this work.

• The quali

fi

ed service person who is allowed to do the refrigerant handling and piping work involved 

in installation, repair, relocation and removal has the quali

fi

cations pertaining to this refrigerant 

handling and piping work as stipulated by the local laws and regulations, and he or she is a 
person who has been trained in matters relating to refrigerant handling and piping work on the air 
conditioners made by Toshiba Carrier Corporation or, alternatively, he or she has been instructed 
in such matters by an individual or individuals who have been trained and is thus thoroughly 
acquainted with the knowledge related to this work.

• The quali

fi

ed service person who is allowed to work at heights has been trained in matters relating 

to working at heights with the air conditioners made by Toshiba Carrier Corporation or, alternatively, 
he or she has been instructed in such matters by an individual or individuals who have been trained 
and is thus thoroughly acquainted with the knowledge related to this work.

These safety cautions describe important matters concerning safety to prevent injury to users or other people 
and damages to property. Please read through this manual after understanding the contents below (meanings of 
indications), and be sure to follow the description.

Indication

Meaning of Indication

 WARNING

Text set off in this manner indicates that failure to adhere to the directions in the warning could 
result in serious bodily harm (*1) or loss of life if the product is handled improperly.

 CAUTION

Text set off in this manner indicates that failure to adhere to the directions in the caution could 
result in slight injury (*2) or damage (*3) to property if the product is handled improperly.

*1:  Serious bodily harm indicates loss of eyesight, injury, burns, electric shock, bone fracture, poisoning, and 

other injuries which leave aftereffect and require hospitalization or long-term treatment as an outpatient.

*2:  Slight injury indicates injury, burns, electric shock, and other injuries which do not require hospitalization 

or longterm treatment as an outpatient.

*3:  Damage to property indicates damage extending to buildings, household effects, domestic livestock, and 

pets.

MEANINGS OF SYMBOLS DISPLAYED ON THE UNIT

WARNING

(Risk of 

fi

re)

This mark is for R32 refrigerant only. Refrigerant type is written on nameplate 
of outdoor unit. 
In case that refrigerant type is R32, this unit uses a 

fl

ammable refrigerant. 

If refrigerant leaks and comes in contact with 

fi

re or heating part, it will create 

harmful gas and there is risk of 

fi

re.

Read the OWNER’S MANUAL carefully before operation.

Service personnel are required to carefully read the OWNER’S MANUAL and INSTALLATION 
MANUAL before operation.

Further information is available in the OWNER’S MANUAL, INSTALLATION MANUAL, and the 
like.

3-EN

4-EN

Summary of Contents for RAV-GM901CTP-E





























Reviews: