-11-
1-4-5. DRY Operation
Operation Steps
Supply Power On
The OPERATION LED on the display panel of the indoor unit starts flashing.
(1)
MODE button
•
Select DRY.
(2)
TEMP button
•
Push the TEMP. button.
•
Select the required temperature between 17°c to 30°c.
•
The fan speed indicator displays AUTO.
•
Low indoor fan speed will be selected automatically.
(3)
ON/OFF button
•
Push this button again to start the air conditioner.
•
The OPERATION LED on the remote receiver unit lights. Operation starts after approximately 3 minutes.
(If you select FAN ONLY mode, the unit will start immediately.)
Stop:
ON/OFF button
•
Push this button again to stop the air conditioner.
2
1
3
1-4-6.
ECONO. Operation
Econo can be selected in the AUTO, COOL and HEAT modes of operation. The fan speed selector
changes to AUTO. The air conditioner now operates in the economy mode.
1-4-7.
Louver Operation
(4)
AUTO Button
•
When this button is first pressed the louver will oscilate, its position can be fixed in a desired direction by
pressing the button again.
4