background image

9

 Installation 

Do not install the air conditioner in the following places

•  Do not install the air conditioner in any place within 1 m from a TV, stereo, or radio set. If the unit is installed in 

such place, noise transmitted from the air conditioner affects the operation of these appliances.  

•  Do not install the air conditioner near a high frequency appliance (sewing machine or massager for business use, 

etc.), otherwise the air conditioner may malfunction.  

•  Do not install the air conditioner in locations where iron or other metal dust is present. If iron or other metal dust 

adheres to or collects on the interior of the air conditioner, it may spontaneously combust and start a 

fi

 re.  

•  Do not install the air conditioner in a humid or oily place, or in a place where steam, soot, or corrosive gas is 

generated.  

•  Do not install the air conditioner in a salty place such as seaside area.  
•  Do not install the air conditioner in a place where a great deal of machine oil is used.  
•  Do not install the air conditioner in a place where it is usually exposed to strong wind such as in seaside area.  
•  Do not install the air conditioner in a place where sulfureous gas generated such as in a spa.  
•  Do not install the air conditioner in a vessel or mobile crane.  
•  Do not install the air conditioner in an acidic or alkaline atmosphere (in a hot-spring area or near a chemicals 

factory, or in a place subject to combustion emissions). Corrosion may be generated on the aluminum 

fi

 n and 

copper pipe of the heat exchanger.  

•  Do not install the air conditioner near an obstacle (air vent, lighting equipment, etc.) that disturbs discharge air. 

(Turbulent air

fl

 ow may reduce the performance or disable devices.)  

•  Do not use the air conditioner for special purposes such as preserving food, precision instruments, or art objects, 

or where breeding animals or growing plants are kept. 
(This may degrade the quality of preserved materials.)  

•  Do not install the air conditioner over an object that must not get wet. (Condensation may drop from the indoor 

unit at a humidity of 80% or more or when the drain port is clogged.)  

•  Do not install the air conditioner in a place where an organic solvent is used.  
•  Do not install the air conditioner near a door or window subject to humid outside air. 

Condensation may form on the air conditioner.  

•  Do not install the air conditioner in a place where special spray is used frequently.

Be careful with noise or vibrations

•  Do not install the air conditioner in a place where noise by outdoor unit or hot air from its air discharge annoys 

your neighbors.  

•  Install the air conditioner on a solid and stable foundation so that it prevents transmission of resonating, operation 

noise and vibration.  

•  If one indoor unit is operating, some sound may be audible from other indoor units that are not operating.

10

 Speci

fi

 cations 

Model

Sound pressure level (dBA)

Weight (kg)

Cooling

Heating

RAV-HM401CTP-E

*

*

23

RAV-HM561CTP-E

*

*

23

RAV-HM801CTP-E

*

*

29

RAV-HM901CTP-E

*

*

37

RAV-HM1101CTP-E

*

*

37

RAV-HM1401CTP-E

*

*

37

RAV-HM1601CTP-E

*

*

37

* Under 70 dBA

Product information of ecodesign requirements. (Regulation (EU) 2016/2281)

http://ecodesign.toshiba-airconditioning.eu/en

– 14 – 

27-EN 

28-EN

Summary of Contents for RAV-HM1101CTP-E


















Reviews: