9
-1-5. Wiring and Setting of Remote Controller Control
• When connected 2 remote controllers
operate the twin
Terminal block for
remote controller cables
Remote controller
cables (Procured locally)
Indoor unit
Outdoor unit
Remote controller
(Follower)
Remote controller
(Header)
Sold
separately
2
1
3
2
1
3
B
A
B
B
A
A
Sold
separately
Terminal block for
remote controller cables
Indoor unit 1
Outdoor unit
Remote controller
(Follower)
Remote controller
(Header)
Sold
separately
2
1
3
2
1
3
B
A
B
B
A
A
Indoor unit 2
2
1
3
B
A
Sold
separately
Remote controller
inter-unit wire
(Procured locally)
Inter-unit wiring
between indoor units
(Procured locally)
[Operation]
1. The operation contents can be changed by Last-push-priority.
2. Use the timer function on the Header remote controller.
2-remote controller control
(Controlled by 2 remote controllers)
This control is to operate 1 or multiple indoor units are operated by 2 remote controllers.
(Max. 2 remote controllers are connectable.)
• When connected 2 remote controllers
operate an indoor unit
<Wired remote controller>
RBC-ASCU1
∗∗∗∗∗
Remove the rear cover of the remote controller and
change the DIP switch.
* Be sure to turn off the breaker first.
How to set remote controller as follower remote controller
1
ON
DIP switch
(Factory default)
2
3
4
5
6
NOTE:
• For details on how to operate other remote controllers, refer to the remote controller manual.
bit 1:
OFF= Header remote controller
(Factory default)
ON = Follower remote controller
<Wireless remote controller>
RBC-AXU31C-E
Remove the rear cover of the remote controller and
change the DIP switch.
*
Be sure to turn off the breaker first.
- 83 -
