background image

– 2 –

Definition of Protective Gear 

When the air conditioner is to be transported, installed, maintained, repaired or removed, wear protective gloves 
and “safety” work clothing.

 

In addition to such normal protective gear, wear the protective gear described below when undertaking the special 
work detailed in the table below.

 

Failure to wear the proper protective gear is dangerous because you will be more susceptible to injury, burns, 
electric shocks and other injuries.

Center of gravity

Work undertaken

Protective gear worn

All types of work

Protective gloves 
“Safety” working clothing

Electrical-related work

Clothing to provide protection from electric shock
Insulating shoes 

Gloves to provide protection from electric shock

Work done at heights

 

(50 cm or more)

Helmets for use in industry

Transportation of heavy objects

Shoes with additional protective toecap

Repair of outdoor unit

Gloves to provide protection from electric shock

Model name

X (mm)

Y (mm)

Z (mm)

RAV-RM561FT-EN/ES

85

285

820

RAV-RM801FT-EN/ES

RAV-RM1101FT-EN/ES

195

290

860

RAV-RM1401FT-EN/ES

RAV-RM1601FT-EN/ES

G

Z

Y

X

Warning indications on the air conditioner unit

These safety cautions describe important matters concerning safety to prevent injury to users or other people and
damages to property. Please read through this manual after understanding the contents below (meanings of
indications), and be sure to follow the description.

*1:Serious bodily harm indicates loss of eyesight, injury, burns, electric shock, bone fracture, poisoning, and other 

injuries which leave aftereffect and require hospitalization or long-term treatment as an outpatient.

*2:Slight injury indicates injury, burns, electric shock, and other injuries which do not require hospitalization or long-term 

treatment as an outpatient.

*3:Damage to property indicates damage extending to buildings, household effects, domestic livestock, and pets.

Indication

Meaning of Indication

Text set off in this manner indicates that failure to adhere to the directions in the warning 
could result in serious bodily harm (*1) or loss of life if the product is handled improperly.

Text set off in this manner indicates that failure to adhere to the directions in the caution 
could result in slight injury (*2) or damage (*3) to property if the product is handled 
improperly.

WARNING

(Risk of fire)

This mark is for R32 refrigerant only. Refrigerant type is written on nameplate of 
outdoor unit.

 

In case that refrigerant type is R32, this unit uses a flammable refrigerant.

 

If refrigerant leaks and comes in contact with fire or heating part, it will create 
harmful gas and there is risk of fire.

Read the OWNER’S MANUAL carefully before operation.

Service personnel are required to carefully read the OWNER’S MANUAL and INSTALLATION MANUAL 
before operation.

Further information is available in the OWNER’S MANUAL, INSTALLATION MANUAL, and the like.

WARNING

CAUTION

3-EN

4-EN

Summary of Contents for RAV-RM1101FT-EN





























Reviews: