– 60 –
7
Energy saving operation
Perform the power saving operation of the air conditioner.
1
Push the [
MENU] button.
2
Push the [
∧
] / [
∨
] button to select
“9.Energy saving” on the menu screen, then
push the “
Set” [
F2] button.
3
Push the [
∧
] / [
∨
] button to select
“1. Energy saving operation” on the
“Energy saving” screen, then push the
“
Set” [
F2] button.
4
To start the Energy saving operation:
After setting “2. Energy saving ratio” and “3.
Energy saving schedule”, push the
“
←
” [ F1] button to select
“ON”, then push the [
MENU] button.
To stop the Energy saving operation:
Push the “
→
” [
F2] button to
select “OFF”, then push the [
MENU]
button.
Energy saving(1/2)
1.Energy saving operation
2.Set temp. range limit
3.Return back
<ON>
<OFF>
Set
Return
Energy saving operation
1.Energy saving operation
2.Energy saving ratio
3.Energy saving schedule
ON / OFF
Return
Fix
Set
Set
Energy saving ratio
Carry out the setting operation while the indoor unit is stopped.
(Turn off the air conditioner before starting the setting operation.)
NOTE
• Cooling / heating performance may be reduced a little because its power is saved during the Energy saving operation.
• “
” appears on the display when the Energy saving operation is activated.
• The Energy saving operation cannot be set on the sub remote controller when the two remote controller system is
used.
• For Energy saving schedule operation, refer to the separate Owner's Manual for remote controller.
• The remote controller may not be used for setting the Energy saving operation depending on the settings of the
central control remote controller or the outdoor unit.
• For “2. Set temp.range limit”, “3. Return back”, or “4. Saving operation”, refer to the separate Owner's Manual for
remote controller.
1
Push the [
∧
] / [
∨
] button to select
“2. Energy saving ratio” on the “Energy
saving operation” screen, then push the
“
Set” [
F2] button.
2
Push the “
%+” [
F1] /
“
%-” [
F2] button to set the
value.
The Energy saving ratio can be set within the
range from 50% to 100% by 1 %. The lower the
value is set, the higher the power saving effect
becomes.
3
Push the [
MENU] button.
“
Setting” appears on the screen, then the
screen returns to the “Energy saving operation”
screen.
Energy saving operation
1.Energy saving operation
2.Energy saving ratio
3.Energy saving schedule
ON / OFF
Return
Fix
Set
Set
Energy saving ratio
Energy saving ratio
75%
%
+
%
–
Return
Fix
%
+
%
–
119-EN
120-EN
