8
TIMER OPERATION
A type of timer operation can be selected from the following three types.
OFF timer
: The operation stops after the set time has passed.
Repeat OFF timer : Every time, the operation stops after the set time has passed.
ON timer
: The operation starts after the set time has passed.
Timer operation
4
3
2
1
ON / OFF
FAN
TEMP.
SWING/FIX
TIME
MODE
VENT
UNIT
SET
CL
FILTER
RESET TEST
TIMER SET
1
Push TIMER SET button.
• The timer display (type) changes every
push of the button.
• SET DATA and timer time displays flash.
2
Push
TIME
to select “SET TIME”.
For every push of
button, the set time increases in the unit of 0.5 hr (30 minutes).
The maximum set time is 72.0 hr.
For every push of
button, the set time decreases in the unit of 0.5 hr (30 minutes).
The minimum set time is 0.5 hr.
3
Push SET button.
•
SETTING
display disappears and timer time display goes on.
(When ON timer is activated, timer time, ON timer
are displayed and other displays disappear.)
Clear of timer operation
4
Push CL button.
• TIMER display disappears.
NOTICE
• Once set “Repeat OFF timer” resumes. So start again, stop by same timer.
For cancel timer, push
CL
button.
OFF
(OFF timer)
(Repeat OFF timer)
No display
(ON timer)
OFF
ON
