– 110 –
No. Part name
Procedure
Remarks
d
Side
cabinet
(left)
1) Following to work of item 1of
c
.
2) Remove the side cabinet (left) and base plate screws.
(2 pcs, Ø4 ×10 hexagon screws)
3) Slide the side cabinet (left) downwards and remove.
e
Air-outlet
cabinet
1) Following to work of item 1
d
of
c
.
2) Remove the screws from the Air-outlet cabinet and
separate plate. (4 pcs, Ø4 × 8)
3) Remove the screws from the Air-outlet cabinet and
base plate. (2 pcs, Ø4 × 10 hexagon screws)
4) Remove the screws from the Air-outlet cabinet and
motor base. (2 pcs, Ø4 × 8)
5) Remove the screws form the Air-outlet cabinet and
heat exchanger. (4 pcs, Ø4 × 8)
e
Side
cabinet
(right)
1) Following to work of item 1 of
c
.
2) Remove the screws securing the inverter assembly
and side cabinet (right). (3 pcs, Ø4 × 8)
3) Remove the screws form the side cabinet (right) and
valve fixing plate. (2 pcs, Ø4 × 8)
4) Remove the screws form the side cabinet (right) and
piping panel (rear). (2 pcs, Ø4 ×10 hexagon screws)
5) Remove the screws form the side cabinet (right) and
base plate. (1pcs, Ø4 ×10 hexagon screw)
6) Remove the screws from the side cabinet (right) and
heat exchanger. (5pcs, Ø4 × 10 hexagon screws)
Side cabinet
(left)
Base plate
Motor base
Motor base
Separate plate
Separate plate
Air-outlet
Air-outlet
cabinet
cabinet
Base plate
Base plate
Motor base
Separate plate
Air-outlet
cabinet
Base plate
Side
cabinet
(right)
Inverter
assembly
