– 2 –
Slim Duct Type
Installation Manual
EN
1
ACCESSORY PARTS
Accessory parts
2
PRECAUTIONS FOR SAFETY
• Ensure that all Local, National and International regulations are satisfied.
• Read this “PRECAUTIONS FOR SAFETY” carefully before Installation.
• The precautions described below include the important items regarding safety.
Observe them without fail.
• After the installation work, perform a trial operation (test run) to check for any problem.
Follow the Owner’s Manual to explain how to use and maintain the unit to the customer.
• Turn off the main power supply switch (or breaker) before the unit maintenance.
• Ask the customer to keep the Installation Manual together with the Owner’s Manual.
WARNING
•
Ask an authorized dealer or qualified installation professional to install (including moving)/
maintain the air conditioner.
Inappropriate installation may result in water leakage, electric shock or fire.
•
Be sure to connect earth wire. (grounding work)
Incomplete grounding cause an electric shock.
Do not connect ground wires to gas pipes, water pipes, lightning rods or ground wires for telephone wires.
•
Turn off the main power supply switch or breaker before attempting any electrical work.
Make sure all power switches are off. Failure to do so may cause electric shock.
•
Install the refrigerant pipe securely during the installation work before operating the air
conditioner.
If the air conditioner is operated with the valve open and without the refrigerant pipe, the compressor sucks
air and the refrigeration cycle is overpressurized, which may cause a burst or injury.
•
When moving the air conditioner for the installation into another place, be very careful not to enter
any gaseous matter other than the specified refrigerant into the refrigeration cycle.
If air or any other gas is mixed in the refrigerant, the gas pressure in the refrigeration cycle becomes
abnormally high and it resultingly causes pipe burst and injuries on persons.
•
Perform installation work properly according to the Installation Manual.
Inappropriate installation may result in water leakage, electric shock or fire.
Part name
Q’ty
Shape
Usage
Installation Manual
2
These manual
(Be sure to hand over to customers)
Insulating pipe
2
For insulation pipe connecting section
Washer
8
M10 × Ø34
For hanging-down unit
Hose band
1
For connecting drain pipe
Flexible hose
1
For adjusting of drain pipe centering
Heat insulator
1
For insulating drain connecting section
Owner’s Manual
1
(Be sure to hand over to customers)
2-EN
+00EH99861401_01EN_SlimDuct_IM.book Page 2 Saturday, March 8, 2008 11:20 AM
Summary of Contents for RAV-SM404SDT-E
Page 40: ...EH99861401 ...
