16
TOSHIBA 1075000646_EN
EN
Operation section
Push each button to select a desired operation.
•
The details of the operation needs to be set up once, afterward, the air conditioner can be used by pushing
button only.
UNIT
SET
CL
1 7
8
!
9
2
4
5
6
3
1
1
1
1
1
Air volume select button
Selects the desired air volume mode.
2
2
2
2
2
Timer set button
TIMER SET button is used when the timer is set up.
3
3
3
3
3
Check button
The CHECK button is used for the check operation.
During normal operation, do not use this button.
4
4
4
4
4
Fan button
FAN button is used when a fan which is sold on the
market or etc. is connected.
•
If “No function” is displayed on the remote
controller when pushing the FAN button, a fan is
not connected.
5
5
5
5
5
Filter reset button
Resets (Erases) “FILTER
” display.
6
6
6
6
6
UNIT and AUTO flap button
UNIT
(No function)
7
7
7
7
7
Operation lamp
Lamp is lit during the operation. Lamp is off when
stopped.
Although it flashes when operating the protection
device or abnormal time.
8
8
8
8
8
button
When the button is pushed, the operation starts, and it
stops by pushing the button again.
When the operation has stopped, the operation lamp
and all the displays disappear.
9
9
9
9
9
Operation select button
Selects desired operation mode.
!
!
!
!
!
Set up temperature button
Adjusts the room temperature.
Set the desired set temperature by pushing
or
.
OPTION :
Remote controller sensor
Usually the TEMP. sensor of the indoor unit senses the
temperature. The temperature on the surrounding of the
remote controller can also be sensed.
For details, contact the dealer from which you have
purchased the air conditioner.
01(EN)_1075000646 P14-20
7/16/04, 13:34
16
3