– 2 –
EN
Warning indications on the air conditioner unit
Warning indication
Description
WARNING
ELECTRICAL SHOCK HAZARD
Disconnect all remote electric power supplies before servicing.
WARNING
Moving parts.
Do not operate unit with grille removed.
Stop the unit before the servicing.
CAUTION
High temperature parts.
You might get burned when removing this panel.
CAUTION
Do not touch the aluminum fins of the unit.
Doing so may result in injury.
CAUTION
BURST HAZARD
Disconnect all remote
Open the service valves before the operation, otherwise there might be
the burst.
WARNING
ELECTRICAL SHOCK HAZARD
Disconnect all remote
electric power supplies
before servicing.
WARNING
Moving parts.
Do not operate unit with grille
removed.
Stop the unit before the servicing.
CAUTION
High temperature parts.
You might get burned
when removing this panel.
CAUTION
Do not touch the aluminum
fins of the unit.
Doing so may result in injury.
CAUTION
BURST HAZARD
Open the service valves before
the operation, otherwise there
might be the burst.
1
Precautions for safety
The manufacturer shall not assume any liability for the damage caused by not observing the description of this
manual.
WARNING
General
• Carefully read Owner’s Manual before starting the air conditioner. There are many important things to keep in mind
for daily operation.
• Ask for installation to be performed by the dealer or a professional. Only a qualified installer (*1) is able to install an
air conditioner. If a non-qualified person installs an air conditioner, it may result in problems such as fire, electric
shock, injury, water leakage, noise and vibration.
• Do not use any refrigerant different from the one specified for complement or replacement. Otherwise, abnormally
high pressure may be generated in the refrigeration cycle, which may result in a failure or explosion of the product or
an injury to your body.
• Places where the operation sound of the outdoor unit may cause a disturbance. (Especially at the boundary line with
a neighbour, install the air conditioner while considering the noise.)
Transportation and storage
• To transport the air conditioner, wear shoes with protective toe caps, protective gloves, and other protective clothing.
• To transport the air conditioner, do not take hold of the bands around the packing carton. You may injure yourself if
the bands should break.
• Before stacking the packing cartons for storage or transportation, heed the precautions written on the packing
cartons. Failure to heed the precautions may cause the stack to collapse.
• The air conditioner must be transported in stable condition. If any part of the product broken, contact your dealer.
• When the air conditioner must be transported by hand, carry it by two or more people.
Installation
• Only a qualified installer(*1) or qualified service person(*1) is allowed to carry out the electrical work of the air
conditioner. Under no circumstances must this work be done by an unqualified individual since failure to carry out the
work properly may result in electric shocks and/or electrical leaks.
• After the installation work has been completed, have the installer explain about the circuit breaker positions. In the
event that trouble has occurred in the air conditioner, set the circuit breaker to the OFF position, and contact a service
person.
• If the unit is installed in a small room, take appropriate measures to prevent the refrigerant from exceeding the limit
concentration even if it leaks. Consult the dealer from whom you purchased the air conditioner when you implement
the measures. Accumulation of highly concentrated refrigerant may cause an oxygen deficiency accident.
• Do not install the air conditioner in a location that may be subject to a risk of expire to a combustible gas. If a
combustible gas leaks and becomes concentrated around the unit, a fire may occur.
• Use the company-specified products for the separately purchased parts. Use of non-specified products may result in
fire, electric shock, water leakage or other trouble. Have the installation performed by a professional.
• Confirm that earthing is performed correctly.
3-EN
4-EN
+001111055901_01EN.book Page 2 Monday, September 5, 2011 2:23 PM
