23
EN
ENGL
ISH
FRANÇAI
S
DEUTSCH
IT
AL
IA
N
O
ESP
AÑOL
ΕΛΛ
Η
ΝΙΚΗ
POR
T
U
G
UÊS
##
#S
W#
#
#
##
#R
U##
#
Before you ask for servicing or repair work, check the following points:
TROUBLE AND CAUSES (Concerning Remote Controller)
Setting Change is Impossible
Symptoms
Causes
Description
The fan speed can not be
changed.
• Check whether the MODE indicated
on the display is “AUTO”.
AUTO
When the automatic mode is selected,
the air conditioner automatically
selects the fan speed.
• Check whether the MODE indicated
on the display is “DRY”.
(DRY)
When dry operation is selected, the air
conditioner automatically selects the
fan speed.
The Transmission Indicator “ ” Never Goes On
Symptoms
Causes
Description
The remote controller signal is
not transmitted even when the
ECONO, FAN button is
pushed.
• Check whether the ON TIMER is
indicated on the display.
The remote controller signal is not
transmitted, because the air
conditioner is off.
The Display Never Goes On
Symptoms
Causes
Description
The TEMP. indicator does not
go on.
(for cooling only model)
• Check whether the MODE indicated
on the display is “FAN ONLY”.
(FAN ONLY)
The temperature can not be set during
fan only operation.
The Display Goes Off
Symptoms
Causes
Description
The indication on the display
disappears after a lapse of
time.
• Check whether the timer operation
has come to an end when the OFF
TIMER is indicated on the display.
The air conditioner operation stops as
the set time has elapsed.
The TIMER indicators go off
after a certain time has
elapsed.
• Check whether the timer operation
has started when the ON TIMER is
indicated on the display.
When the time set to start the air
conditioner has been reached, the air
conditioner will automatically start and
the appropriate indicator will go off.
The Signal Receiving Tone Does Not Sound
Symptoms
Causes
Description
No receiving tone sounds from
the indoor unit even when the
START/STOP button is
pushed.
• Check whether the signal transmitter
of the remote controller is properly
directed at the receiver of the indoor
unit when the START/STOP button is
pushed.
Direct the signal transmitter of the
remote controller to the receiver of the
indoor unit and then repeatedly push
the START/STOP button twice.
AMP Air Conditioning
www.ampair.co.uk | sales@ampair.co.uk