Wireless Remote Controller Kit
Owner’s Manual
– 9 –
5
Louver Direction
• While the air conditioner is not working, the louver (air direction adjusting plate) is closed
automatically.
• During the preparation for heating, the louver is directed upward and it starts swinging after
the preparation for heating is canceled though the automatic louver display on the remote
controller shows swinging even during this period.
Set louver direction
Push
during operation. The louver
direction changes with every push of the
button.
In HEAT operation
Direct the louver downward.
Start swing operation
Push
to set the louver direction to the
lowest position, and then push
again.
SWING is displayed and the louvers swing
automatically.
In COOL/DRY operation
Direct the louver horizontally. Otherwise,
dew drop may form around the discharge
port and drop from the unit.
Stop swing operation
Push
at a desired position while the
louver is swinging. When
is pushed,
the louver direction can be set again from
the highest position.
.
* In COOL/DRY mode, the louver does not stop
as it directs downward. If stopping the louver as
it directs downward during swing operation, it
stops after moving to the third position from the
highest position.
Fan mode
All operation modes
Display when stopping the swing
• This remote controller has no function to
set air direction individually or to change
the swing mode that are described in the
Owner’s Manual of the indoor unit.
Initial setting
Initial setting
Initial setting
Swing
Continuous
operation
Heating/fan mode
Cooling/dry mode
9-EN
Summary of Contents for RBC-AX23UW-E
Page 16: ...EH72394301 ...