Toshiba RBC-AX23UW-E, Owner'S Manual

Wireless Remote Controller Kit

Owner’s Manual

– 3 –

2

Part Names and Functions

„

Remote Controller (WH-H1JE2)

• Up to 8 indoor units in a group can be controlled by one remote controller.

1

Transmitting part

2

ON/OFF button

Starts and stops the air conditioner 
alternately.

3

Mode button

Selects desired operation mode.

4

Fan speed button

5

Timer set button

Use to setup the timer. (See page 8)

6

Filter button

No function

7

RESET button

Used after batteries are replaced or the slide 
switch is switched. (See page 10)

8

Slide switch (See page 10)

9

Battery compartment (See page 10)

10

Cover

Slide the cover downward holding its both 
sides.

11

Remote controller sensor

Senses the ambient temperature when the 
remote controller is selected with the sensor 
button.

12

LCD

Displays the air conditioner operation mode.
(This illustration shows all display contents.)

13

AUTO louver display differs according 
to the installed unit. (See page 9)

14

Setup temperature button

Adjusts the set point.
Select the desired set point by pushing these 
buttons.

15

Swing/louver direction button 
(See page 9)

16

Address button (See page 12)

17

Ventilation button

Use this when a ventilation fan or other unit, 
purchased on the market, has been 
connected. (no function)

18

Sensor button

Selects the temperature sensor of the remote 
controller.
The temperature sensor of the indoor unit is 
selected by default. While the indoor unit 
temperature sensor is selected, 

 is 

displayed on the display.

11

12

13

14

15

16

17
18

1

2

3
4
5

6
7
8

9

10

ADR

SENSOR

ADR

ACL

3-EN