background image

Once you select the timer operation mode, the settings 
are saved in the remote controller. Thereafter, the 
air conditioner will start operating under the same 
conditions when you simply press the ON/OFF button of 
the remote controller. 

If the clock display is 

fl

ashing, you cannot set the timer. 

Follow the instructions in the section “SETTING THE 
CLOCK” and then set the timer.

Combined timer (Setting both ON and OFF 
timers simultaneously)

OFF timer 

 ON timer

(Operation 

 Stop 

 Operation)

This feature is useful when you want to stop the air 
conditioner after you go to sleep, and start it again in the 
morning when you wake up or you return home. 
Example: 
To stop the air conditioner and start it again next 
morning.

Operation

Operation again

Stop

 

Setting combined TIMER

1.  Press the OFF TIMER 

 button to adjust the OFF 

timer.

2.  Press the ON TIMER 

 button to adjust the ON 

timer.

3.  Press the SET 

 button.

ON timer 

 OFF timer

(Stop 

 Operation 

 Stop)

You can use this setting to start the air conditioner when 
you wake up and stop it when you leave the house.
Example:
To start the air conditioner next morning and stop it.

Operation

Stop

Stop

 

Setting combined TIMER

1.  Press the ON TIMER 

 button to adjust the 

ON timer.

2.  Press the OFF TIMER 

 button to adjust the 

OFF timer.

3. Press the SET 

 button.

•  Either ON or OFF timer function which is closer to the 

current time, is activated 

fi

rst. 

•  If the same time is set for both ON and OFF timers, no 

timer operation is performed. Also, the air conditioner 
may stop operating.

Every day combined timer (setting both ON 
and OFF timer simultaneously and activate 
every day.)

This feature is useful when you want to use combined 
timer at the same time every day.

 

Setting combined TIMER

1.  Press the ON TIMER 

 button to adjust the 

ON timer.

2.  Press the OFF TIMER 

 button to adjust the 

OFF timer.

3.  Press the SET 

 button.

4.  After step 3, an arrow mark (  or  ) 

fl

ashes for 

about 3 seconds and during this 

fl

ashing, press the 

SET 

 button.

•  During the every day timer is activating, both arrows 

( ,  ) are indicated.

Cancel the timer operation

Press the CLR 

 button.

Clock display

During the TIMER operation (ON-OFF, OFF-ON, OFF 
timer) clock display is disappeared so as to show the 
setting time. To see the present time, press SET button 
brie

fl

y and the present time is displayed about 3 seconds.

Owner’s Manual

- 10 -

10-EN

Summary of Contents for RBC-AX33UYP-E

















Reviews: