background image

– 8 –

High power operation

The Hi POWER (high power operation) mode 
automatically controls room temperature, airflow and 
operation mode so that the room is quickly cooled in 
summer and warmed in winter.

Setting Hi POWER mode

1

Hi POWER button

Push the Hi POWER button after starting any 
operation. At the same time, the “Hi POWER” mark 
on the remote controller is indicated.

Cancelling Hi POWER mode

1

Hi POWER button

Push the Hi POWER button once again.
At the same time, the “Hi POWER” mark on the 
remote controller goes out.

CAUTION

• The Hi POWER mode cannot be activated in the 

DRY and FAN ONLY operation and when the ON 
TIMER operation is reserved.

• When Auto changeover control mode is selected, 

the air conditioner does not automatically control the 
room temperature.

Quiet operation

The QUIET mode provides quiet operating status by 
automatically setting the fan speed to the lowest speed.

Setting QUIET mode

1

QUIET button

Push the QUIET button after starting any operation. 
At the same time, the 

 mark is indicated.

Cancelling QUIET mode

1

QUIET button

Push the QUIET button once again.
At the same time, the 

 mark on the remote 

controller disappears.
• When the QUIET mode is cancelled, the fan 

speed changes to AUTO. You can change it to 
your preferred speed.

CAUTION

The QUIET mode cannot be activated in the DRY 
operation.

NOTE

Under certain conditions, the quiet operation may not 
provide adequate cooling or heating due to the feature 
of quietness.

SWING

FAN

FIX

QUIET

Hi POWER

1

SWING

FAN

FIX

QUIET

Hi POWER

1

8-EN

Summary of Contents for RBC-AXU31U-E



















Reviews: