1-2-4. Power PC Board
Cautions :
• Danger of explosion if battery is incorrectly replaced.
Replace only with the same or equivalent type.
1. Remove the top cover. (Refer to item 1-1-1.)
2. Remove the HDD. (Refer to item 1-1-2.)
3. Remove the front panel. (Refer to item 1-1-3.)
4. Remove the Digital Tuner Module. (Refer to item 1-2-1.)
5. Remove the RAM drive. (Refer to item 1-1-4.)
6. Disconnect the connector (1) and four connectors (2).
7. Remove the screw (4), then remove the rear panel (3).
8. Remove four screws (5), then remove the Power PC board (6).
Fig. 2-1-10
Screw (4)
Power PC board (6)
Rear panel (3)
Screws (5)
Connectors (2)
Connector (1)
Connectors (2)
