24
HL66 (E/F) Web 213:276
Chapter 5: Using the TV’s features
To open the Channel Browser
™
:
•
Press
3
C
,
#
c
, or
i
on the remote control.
•
Press
3
C
to surf backward through the previously tuned 32
channels or inputs in the History list, the channels in the
ANT 1 channel list, or the inputs in the Inputs list.
•
Press
#
c
to surf forward through the channel/input History,
the ANT 1 channel list, or the Inputs list.
Elements of the Channel Browser
™
1
Input type
2
Highlighted item (channel or input)
3
Channels stored in the channel history
4
Instructions for programming the Home key (this will be
replaced by the 6th item in the History list, ANT 1 list, or
Inputs list).
5
Current list (
History
,
ANT 1
or
Inputs
)
6
Current input
7
Current antenna type (cable or TV)
8
Active channel number
9
Channel call letters (if available)
10
Resolution
11
Home source
To toggle among History, ANT 1 and Inputs lists:
After opening the Channel Browser
™
, press
B
or
b
to toggle
among
History
,
ANT 1
and
Inputs
.
Note:
The Channel Browser
™
opens in
History
list by default.
Once another list has been selected, the Channel Browser
™
will open in the last selected list.
To tune to a channel or input in Browse mode:
1
While watching TV, press
3
C
or
#
c
to open the
Channel Browser
™
and surf back to a previous item or
surf forward to the next item in the list.
In
Browse
mode, when you stop on an item in the
Channel Browser
™
, it will be highlighted and the TV will
automatically tune to the channel or input.
2
Press
O
to close the Channel Browser
™
.
Note:
The Channel Browser
™
will close automatically if
you do not make a selection within 30 seconds.
To tune to a channel or input in Select mode:
1
While watching TV, press
3
C
or
#
c
to open the
Channel Browser
™
and surf back to a previous item or
surf forward to the next item in the list.
In
Select
mode, when you stop on an item in the
Channel Browser
™
, it will be highlighted but the TV will
not automatically tune to the channel or input.
2
Press
T
to tune the TV to the highlighted item.
3
Press
O
to close the Channel Browser
™
.
Adding and clearing channels and inputs in the
channel history
Adding channels and inputs to the channel history:
As a channel or input is tuned, the Channel Browser
™
adds it
to the History and displays it on the “right side” of the
Channel Browser
™
. Previously tuned channels/inputs are
“shifted” to the left, eventually moving off the left side of the
Channel Browser
™
. Press
3
C
to surf backward through the
previously tuned channels/inputs. Any channel or input that is
tuned repeatedly will not be repeated in the History, but instead
is moved to the top of the list on the right side of the
Channel Browser
™
.
The Channel Browser
™
will store the following channels:
•
All channels that are tuned using the numeric buttons on the
remote control.
•
All channels that are tuned using
<
or
,
,
M
or
m
on
the remote control.
•
All inputs that are tuned for at least 5 seconds.
Note:
Whenever an item is selected that cannot be tuned (for
various reasons), the TV will automatically tune to the
previously viewed channel or input.
Clearing channels from the channel history:
•
Reconfiguring the
ANT 1
input will clear the channel
history.
Note:
See page16 for details on configuring the antenna
input.
•
Once 32 channels or inputs are stored in the history list, the
oldest item will be removed from the list when a new
channel or input is tuned.
•
Turning off the TV will clear the channel history only if
History List
in the
Channel Browser Setup
is set to
“
Power Off Clear (On)
.”
4
History
ANT 1
CABLE
4
AAA
480i
ANT 1(4)
Hold HOME key
3 sec to program
1
1
87-1
1
4-1
1
6
ClrStrmHD2
BLOCKED
__
5
6
7
8
9
10
11
1 2
3
4
2632HL66_EN.book Page 24 Tuesday, July 18, 2006 3:47 PM
