33
HL66 (E/F) Web 213:276
Chapter 5: Using the TV’s features
Using the StableSound
®
feature
The StableSound
®
feature limits the highest volume level to
prevent extreme changes in volume when the signal source
changes (for example, to prevent the sudden increase in
volume that often happens when a TV program switches to a
commercial).
To turn on the StableSound
®
feature:
1
Press
Y
and open the
Audio
menu.
2
Highlight
Audio Settings
and press
T
.
3
In the
StableSound
field, select
On
.
4
To save the new settings, highlight
Done
and press
T
.
To revert to the factory defaults, highlight
Reset
and
press
T
.
Note:
The RESET function returns your audio adjustments
to the following factory settings:
Bass . . . . . . . . center (50)
Treble . . . . . . . center (50)
Balance . . . . . . center (0)
StableSound . . Off
To turn off the StableSound feature:
Select
Off
in step 3 above.
Selecting the optical audio output format
You can use this feature to select the optical audio output
format when you connect a Dolby Digital decoder or other
digital audio system to the
Optical Audio Out
terminal on
the TV (
-
“Connecting a digital audio system” in the
Installation Guide
).
To select the optical audio output format:
1
Press
Y
and open the
Audio
menu.
2
Highlight
Audio Setup
and press
T
.
3
In the
Optical Output Format
field, select either
Dolby Digital
or
PCM
, depending on your device.
4
To save the new settings, highlight
Done
and press
T
.
To revert to the factory defaults, highlight
Reset
and
press
T
.
Using the Locks menu
The Locks menu includes the Enable Rating Blocking, Edit
Rating Limits, Channels Block, Input Lock, Front (control)
Panel Lock, and New PIN Code features. You can use these
features after entering the correct PIN code.
Entering the PIN code
1
Press
Y
and highlight the
Locks
menu icon.
2
Press
b
, which displays the PIN code entry screen.
•
The
Lock System
screen (below) appears if a PIN
code has not been stored. Press the Channel Number
buttons to enter a new four-digit code, enter the code a
second time to confirm, and press
T
.
•
The
Locks/Active
screen (below) appears if the PIN
code is already stored. Use the Number buttons to enter
your four-digit code and press
T
.
If the wrong PIN code is entered, the message “Incorrect PIN
code, please try again!” appears. Highlight
Retry
and press
T
. Enter the code again and press
T
.
Done
Audio Settings
Bass
100
Treble
Reset
100
0
Balance
StableSound
On
Done
Audio Setup
MTS
Language
Optical Output Format
Dolby Digital
Reset
Stereo
English
CH RTN
ENTER
EXIT
Navigate
Select
Back
Exit
Enable Rating Blocking
Edit Rating Limits
Channels Block
Input Lock
Off
Off
Front Panel Lock
New PIN Code
Locks
Off
Please enter a 4 digit PIN code
Confirm PIN code
Cancel
Done
Lock System
Locks
Active
Please enter the 4 digit PIN code
Cancel
* * * *
Done
(continued)
2632HL66_EN.book Page 33 Tuesday, July 18, 2006 3:47 PM
