11
Getting Ready
3
Insert the AC adapter (sold separately) power
plug into the power outlet
• The LED indicator lights (red) while charging (it does not
light red even while charging if flashing green). It turns off
when charging is complete.
4
When charging ends, grasp the microUSB
plug and pull it straight out, and close the
external connector terminal cap
₅
Disconnect the connector of the AC adapter
(sold separately) from the external connector
terminal of the Toshiba microUSB-18 pin
(charger) converter cable 02
• While pressing the release buttons on either side of the
connector, pull it out horizontal with the connector terminal.
₆
Disconnect the AC adapter (sold separately)
power plug from the power outlet
◎ The Toshiba microUSB-18 pin (charger) converter cable 02 is to
connect the IS04 and the AC adapter (sold separately). Even if
your terminal is connected to a PC, such as via USB cable WIN,
data cannot be transmitted and the battery cannot be charged.
Use the accessory Toshiba microUSB-USB converter cable 02
to connect to a PC.
◎ After charging, securely close the cap of the external connector
terminal to keep out water and dust. (▶P.7 "Closing the external
connector terminal cap")
Turning your terminal on/off
Turning your terminal on
1
Press and hold
C
(for about 2 seconds) until
the IS04 vibrates once and the LED indicator
lights (green)
After a while, the lock screen is displayed.
2
Place your finger on the bottom edge of the
screen and drag it upward
The home screen is displayed.
Turning your terminal off
1
1 Press
C
until the mobile
phone option menu is
displayed
《Mobile phone
option menu》
2
"Power off"→"OK"