English
20
Panel lock, time display,
stereo/bilingual transmissions, the timer
From the
FUNCTION
menu select
Panel lock
and choose
On
or
Off
using
left
or
right
.
Panel lock
disables the buttons on the television. All
buttons on the remote control can still be used.
Panel lock
1
When
Panel lock
is
On
, a reminder will appear when
the buttons on the television are pressed.
If the standby
button is pressed the television will switch off and
can only be brought out of standby by using the
remote control.
FUNCTION
Teletext
Auto.
Panel lock
On
Auto format
On
Blue screen
On
Side Panel
1
MENU
Back
EXIT
Watch TV
Press
down
to select
On
or
Sleep timer
. Use the
number buttons to set the required time. For
example, to switch the television off in one and a
half hours enter 01:30, or press
right
to
increase/decrease in steps of 10 minutes.
If setting the
Sleep timer
, press
EXIT
to finish. If
setting the
On timer
, press
down
to select
On
timer Position
, enter the programme position
number required, then press
i
to put the
television into Standby. The GREEN On timer
indicator on the front of the television will now
be lit.
Any equipment connected with SCART leads must
also be put into Standby to prevent them from
being displayed when the timer switches on.
Once the
On timer
has been set the television
can be switched on at any time by pressing
i
.
The GREEN On timer indicator will remain on
until the set time period as passed when the
television will go to the chosen channel. This
feature can help to avoid missing favourite
programmes.
To cancel the
On timer/Sleep timer
, enter zero
in each position.
The television can be set to turn itself
On
or
Off
after a
certain time.
The Timer
2
3
4
1
Press
MENU
and
left
or
right
to select the
TIMER
menu.
TIMER
Sleep timer
01:30
On timer
00:00
On timer Position
01
MENU
Back
EXIT
Watch TV
If stereo or dual language broadcasts are transmitted the
word Stereo or Dual will appear on the screen each time
programme positions are changed, disappearing after a
few seconds. If the broadcast is not in stereo the word
Mono will appear.
Stereo…
Press
O
I/II
to select
Stereo
or
Mono
.
Bilingual…
Bilingual transmissions are rare. If they
are
transmitted the word
Dual
will display
.
Choose the
required programme number and if the word
Dual
appears press
O
I/II
to select
Dual 1
,
Dual 2
or
Mono
.
Stereo and Bilingual transmissions
The time display facility allows the current (text service)
time to be seen on the television screen.
Press
8
/
9
whilst watching a normal television
broadcast to see a time display from the broadcaster. It
will remain on screen for about 5 seconds.
The Time Display
g
