Toshiba RemotEye 4 User Manual Download

Page: 105 / 262

RemotEye 4 User Manual – 90988-007

105

Here is the way to manually

Upgrade RemotEye 4 Firmware:

Web Interface: Go to

Settings



RemotEye 4 System Settings



System/Network

menu then Enable

Network Upgrade

Note: To enable the Network Upgrade user has to change the security level to administrator by logging in
as Administrator.

2) Open the

Tupgrade

application software and click on the

Discover

icon. If no RemotEye 4 auto populates

press on the

icon and enter the IP, Username, and Password. If it still does not appear please check your

network security and your computer firewall.

Select

the check box

right next to the RemotEye 4 that will be updated.

4) Select the

Edit

button and enter the Username and Password.

5) Select the

Open File

button and select the firmware to be uploaded.

6) Select the

Upgrade Firmware

button to start the upgrade process.

Figure 11-18 Tupgrade Utility Opening Display

Table 11-1 Tupgrade Toolbar Functions

Toolbar ID

Icon Name

Description/Function

Set IP

Manually set found device IP address, subnet mask and gateway

Acquire

Get all device parameters. This generates a config file.

Browse

Use default browser to open homepage of selected device

Add

Pop-up

Add

dialog to add one device

Delete

Delete one or more selected devices.

Edit

Pop-up Edit dialog to modify a device configuration.

Discover

Discover all RemotEye devices on the network.

Open file

Open the location (directory) of uploaded file.

Upgrade Firmware

Upgrade firmware after unit selected and file uploaded

Used in conjunction with the

RemoteConfig

Tool, the Tupgrade Tool can push/save a RemotEye 4 Config file to

one or more selected RemotEye 4’s simultaneously, making for a quick system setup.

To save RemotEye 4 Config file:

Discover

Manually

add the RemotEye 4 to the list.

Select the check box

of the RemotEye 4 to acquire config file.

Summary of Contents for RemotEye 4







































































































































































































































































Search results

Summary of Contents for RemotEye 4

Reviews:

Related manuals for RemotEye 4

Brands by name

Popular brands

Toshiba RemotEye 4, User Manual

Search results

Summary of Contents for RemotEye 4

Reviews:

Related manuals for RemotEye 4

Brands by name

Popular brands